OWON MSO7062TD 60MHz Mixed Signal Oscilloscope

OWON MSO 7062TD 60MHz Mixed Signal Oscilloscope w/Logic Analyzer

•2 in 1 ( DSO+LA )
•8" inch LCD color display
•Support USB for data transmission to PC
•USB Flash Disk Storage
•20 Automatic Measurements
•Digital Storage Oscilloscope
•60 MHz bandwidth
•Max up to 2 GS/s sample rate
•Auto-scale
•FFT
•Logic Analyzer
•100MHz bandwidth
•Max up to 1 GS/s sample rate
•16 input channels

Specifications:

Bandwidth - 60 MHz

Sample rate (Real time) - 1 GS/s (500 MS/s for dual channels)

Horizontal Scale (S/div) - 2ns/div-100s/div step by 1-2-5

Rise time - ≤3.5ns

Display - 8.0'' color LCD, TFT Screen, 640x480 pixels, 65535 colors

DC accuracy (Average) - Average>16:±(3%reading+0.05div) for deltaV

Vertical Sensitivity - 2mV/div -10V/div

DC Gain Accuracy - ±3%

Vertical resolution (A/D) - 8 bits (2 channels simultaneously)

Channels - Dual channels + external trigger

Acquisition mode - Normal, Peak Detect, Average

Record length - Max.2M points

Waveform storage - 4 waveforms

Interpolation - (sin x)/x

Max. Input Voltage - 400V (DC + AC PK-PK )

Probe attenuation factor - 1X, 10X, 100X, 1000X

Trigger Mode - Edge, Video, Alternate, Pulse, Slope

Automatic Measurement - Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Preshoot, Risetime, Falltime,+Width, -Width, +Duty, -Duty, Delay A-B, Delay A-B

Waveform math - +, -, x, /, FFT

Power supply - 100-240V ACRMS, 50Hz/60Hz, CAT II

Lissajou’s figure Bandwidth - 100MHz

Phase difference - ±3 degrees

Communication interface - USB, Support USB Flash Disk Storage

Fuse - 1A, T grade, 250V

Cymometer - Available

Power Supply - 110V-240V ACRMS, 50/60Hz, CAT II

Logic Analyzer Characteristics

Sample rate (real time) - 20S/s to approximately 1 GS/s

Bandwidth - 100 MHz

Channels - 16

Record length - Max 4M/channel

Input impedance - 660K Omega ±5% // 15±5pF

Trigger mode - Edge trigger, Bus trigger, State trigger, Data alignment trigger, Data width trigger,

Distributed - queue trigger

Trigger position setting - Pre-trigger, mid-trigger, re-trigger

Threshold Voltage - ±6V (4 settings)

Input Signal Range - ±30V

Data search - Available

Data System - Binary system, Decimal system, Hex

Digital filter - 0, 1, 2 optional

Setting storage - 10 settings