OWON XDS3102A N-IN-1 DIGITAL STORAGE OSCILLOSCOPE - 2 CHANNELS - 100MHZ - 1GS/S

OWON XDS3102A n-in-1 Digital Storage Oscilloscope - 2 Channels - 100MHz - 1GS/s

Overview:

· Low background noise

· 40M deep memory record length

· 75,000 wfms/s refresh rate

· Super-portable body design (body thickness - 9 cm)

· Functioning as n-in-1:

· Frequency Counter

· Data Logger

· Multimeter

· Waveform Generator

· Oscilloscope

· Battery supported

· WiFi module integrated, app s/w supported

· Multi- trigger, and bus decoding function

· Multi-interface integration - USB host, USB device, LAN, AUX, and infrared controller

· 8 inch 800 x 600 pixels high resolution LCD

· Optional multi-touch screen

Xvisual - The 3G Oscilloscope Technology Platform from OWON - your powerful n-in-1 on-site measurement station

OWON Xvisual Platform Highlights:

1. 12-bit high vertical resolution model - XDS-A series product achieves 16 times resolution, and definition more than its general 8-bit counterpart, which makes it the better solution for small signal measurements, and signal detail restoration from large signals

2. Platform – fully restore waveform detail(s).

3. Multi-trigger supports - Logic, Time-out, I2C, SPI,RS232, Runt, Windows, Nth Edge, and CAN

4. Serial bus decoding available for I2C, SPI, RS232, and CAN

5. Built-in multimeter module, with auto-scale, and data logging function

6. Built-in dual-channel 25MHz / 50MHz arbitrary waveform generator module, with sample rates of 125MS/s / 250MS/s and 20mVpp signal measured by common 8-bit DSO, 10 times zoomed 20mVpp signal measured by 12-bit XDS series DSO, 10 times zoomed

7. Built-in WiFi module gives the ability to communicate with mobile devices providing remote control, together with simultaneous measurement result(s) display via app software. Waveform data-saving, checking, co-sharing is possible, along with co-analyzing 8. IPS screen exports lively waveform detail, and its multi-point touch function improves operation efficiency considerably.

9. Optional battery makes floating measurements possible, and more convenient for field use.


OWON XDS Series n-in-1 Digital Storage Oscilloscope Specifications: (Optional Modules Are Listed Below)

Model - XDS3102A

Bandwidth - 100 MHz

Sample Rate - 1GS/s (3102 & 3102A)

Vertical Resolution - (A/D) 12 bits

Record Length - 40M

Waveform Refresh Rate - 75,000 wfms/s

Horizontal Scale (s/div) - 2ns/div - 1000s/div, step by 1 - 2 - 5

Rise Time - (at input, typical) ≤3.5ns

Channel - 2 + 1 (external)

Display - 8" color LCD, 800 x 600 pixels (optional 1024 x 768 pixels IPS display available)

Input Impedance - 1MΩ ± 2 %, in parallel with 15pF ± 5pF

Channel Isolation - 50Hz : 100 : 1, 10MHz : 40 : 1

Max Input Voltage - 1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms

DC Gain Accuracy - ±1%

DC Accuracy average - ≥ 16 : ±(3% reading + 0.05 div) for △V

Probe Attenuation Factor - 0.001X - 1000X, step by 1 - 2 - 5

LF Respond (AC, -3dB) - ≥5Hz (at input, A C coupling, -3dB)

Sample Rate / Relay Time Accuracy - ± 1ppm

Interpolation - sin(x) / x

Interval (△T) Accuracy (full bandwidth)

· Single: ±(1 interval time + 1ppm x reading + 0.6ns);

· Average > 16 : ±(1 interval time + 1ppm x reading + 0.4ns)

Input Coupling - DC, A C, and GND

Vertical Sensitivity - 1mV/div - 10V/div (at input)

Trigger - Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, R S232, and CAN (optional)

Bus Decoding - I2C, SPI, R S232, and CAN (optional)

Trigger Mode - Auto, Normal, and Single

Vertical Range - ±2V (1mv/div - 50mv/div), ±20V (100mv/div - 1V/div), ±200V (2V/div - 10V/div)

Line / Field Frequency (video) - NTSC, PAL and SECAM standard

Cursor Measurement - △V, and △ T between cursors, △ V and △ T between cursors, auto-cursor

Automatic Measurement - Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B , Delay A→B , +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count

Waveform Math - +, -, ×, ÷, FFT

Waveform Storage - 100 waveforms

Lissajou's Figure

- Bandwidth - Full bandwidth

- Phase Difference ±3 degrees

Communication Interface - USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)

Frequency Counter - Available

Power Supply - 100 - 240 V AC, 50 / 60Hz, CAT II

Power Consumption - ＜15W

Fuse - 2A, T class, 250V

Battery (optional) - 3.7V, 13200 mA

Dimension (W x H x D) - 340 x 177 x 90 (mm)

Weight - 2.6 kg

Multimeter Specifications (optional):

Full Scale Reading - 3 ¾ digits (max 4000 count)

Diode - 0V - 1.5V

Input Impedance - 10MΩ

Continuity Test - <50 (±30) beeping

Capacitance - 51.2nF - 100uF: ±(3% ± 3 digits)

Voltage

· VDC : 400mV, 4V, 400V: ±(1 ± 1 digit); max input: DC 1000V

· VAC: 4V, 40V, 400V: ±(1 ± 3 digits); frequency: 40Hz - 400Hz; max input: A C 400V (virtual value)

Current

· DC: 40mA, 400mA: ±(1.5% ± 1 digit); 10A: ±(3% ± 3 digits)

· AC: 40mA: ±(1.5% ± 3 digits), 400mA: ±(2% ± 1 digit), 10A: ±(3% ± 3 digits)

Impedance - 400Ω: ±(1% ± 3 digits), 4 KΩ - 40MΩ: ±(1% ± 1 digit)

Arbitrary Waveform Generator Specifications (optional):

Max Frequency Output - 25MHz

Sample Rate - 125MS/s

Channels - 1-ch or 2-ch available

Vertical Resolution - 14 bits

Amplitude Range - 10mVpp - 6Vpp

Waveform Length - 8K

Standard Waveform - Sine, Square, Pulse, and Ramp

Built-in Waveforms - Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 46 built-in waveforms

* Only available for XDS3102, and XDS3202

Accessories Included: Power Cord, CD-ROM/Manual, USB Cord, Probe, Probe Adjust

OWON XDS n-in-1 Series Oscilloscope Optional Modules & Accessories:

AV-VGA Port Module

Digital Multimeter Module

Multi-Touch Screen Module

Serial Bus Decoding Module

Trigger and Decoding Module

WiFi Connectivity Module

Battery

Soft Carrying Bag